⇢

Fill in a Valid Peco Service And Meter Application Form

The Peco Service And Meter Application form is a crucial document for individuals and businesses seeking electric service from PECO. This form facilitates the request for new service, upgrades, or modifications, ensuring that all necessary information is collected for efficient processing. Proper completion of the application is essential to avoid delays and ensure compliance with PECO's requirements.

Get Your Form Now

Get Your Form Now

Navigation

Document Sample

INSTRUCTIONS FOR PREPARING APPLICATIONS FOR ELECTRIC SERVICE & METER

Please refer to the sample application while reviewing the following notes. The letters below correspond with those on the sample. NOTE: THE "BLANK" FORM IS BELOW THE "SAMPLE" FORM

A.After reading the instructions at the top of the application, locate the PECO regional office in which the service is requested. Check the appropriate box and mail or fax the completed application to the appropriate regional office.

B.Complete the fields for customer's name and service location. Customer's Driver's License Number or Social Security Number is now required.

Note: (*) Include PECO Energy pole # and/or Lot # only if applicable.

(**) Use the address of the service when applying for underwriter's inspection.

C.Complete the fields for customer's PECO billing address or account number (within last 60 days).

D.Complete fields regarding you as the electrician or contractor, and indicate where you would like the reply sent. The Electrician/Builder Tax Identification number is now required. Also, please include the date you would like the reply returned to you.

E.Indicate your current construction status, and include the date PECO service is requested. Please avoid using "as soon as possible".

F. thru J. Indicate the following:

•Type of Request

•Type of Service (include number of units and area per unit)

•Service Characteristics

•Meter Information

•Heating/Air Conditioning

K.Complete the table concerning the load characteristics of the service. For each applicable type of load, provide: 1) Connected KW, 2) Maximum Summer KW Demand, and 3) Maximum Winter KW Demand.

L.Complete the table concerning motor information.

M.If compensated metering will be used, indicate totalizer and general load (KW).

N.Include any additional comments.

Application MUST be signed and dated.

Forms Rev. 5/18

PECO

Application for Electric Service & Meter

M-24175 (front) Rev. 5/18

INSTRUCTIONS:

Please complete the front page of this request and return to the PECO Regional Office (listed below) in the area service is required. Incomplete information may result in a delay in processing.

All work must comply with PECO Electric Service Requirements manual and be inspected by an approved inspection agency. (City of Philadelphia requests may be shared with Licenses & Inspections). Not all service voltages are available in all areas. Before purchasing electrical equipment or proceeding with any wiring, information regarding service availability and meter location should be obtained from the company.

A credit application and agreement must be completed if the customer has not had PECO service within the last 60 days. The company reserves the right to cancel this request if no further communication is received from the customer within 90 days of PECO's response date.

NOTE: IF DEMOLISHING A BUILDING AND NEED PECO TO REMOVE ELECTRIC OR GAS FACILITIES, PLEASE CALL 8-1-1 (PA ONE CALL) FOR DEMOLITION REQUEST

NEW BUSINESS SERVICES (1-800-454-4100) http://www.peco.com

PHILADELPHIA

DELAWARE & CHESTER COUNTIES

BUCKS & MONTGOMERY

NEW RESIDENTIAL

COUNTY

1050 W. Swedesford Rd.

COUNTIES

CONSTRUCTION

830 S. Schuylkill Ave.

Berwyn, PA 19312

400 Park Ave.

(All Counties)

Philadelphia, PA 19146

Email:DelChesterServiceApplications@ex

Warminster, PA 18974

400 Park Ave.

Email:PhilaNewBusiness@e

eloncorp.com

Email:Bucksmontserviceapplications@e

Warminster, PA

18974

xeloncorp.com

Fax # (610) 725-1416

xeloncorp.com

Email:NRCGMETERORDERS@P

Fax # (215) 731-2327

Fax # (215) 956-3240

eco-Energy.com

Fax # (215) 956-3380

CUSTOMER NAME

Tax ID # or SSN

TYPE OF REQUEST

New Service

Load Increase/Decrease

Reintroduction of Service

Temporary Service

Upgrade/Changes

Demolition (Remove

Separation of Wiring

Service Relocation

Service)

** ADDRESS TO BE SERVED

APARTMENT/LOT #

Make-Safe (De-

energize/Cover)

CITY, STATE

ZIP CODE

TYPE OF SERVICE: Please include site plan.

 RESIDENTIAL

 COMMERICAL

 Single House

 Mobile Home

 Store

 Office

 Apartment

 Modular Home

 Industrial

 Warehouse

UTILITY POLE#

SUBDIVISION/DEVELOPMENT

TOWNSHIP/MUNICIPALITY/WARD#

 Duplex

 Town House

 Restaurant

 Other _____________________________

Area of Building _______________________ Sq. Ft.

* If Applicable

SERVICE CHARACTERISTICS:

** Please use this address when applying for underwriter’s inspection

PHASE

VOLTS

WIRES

 Underground

 Aerial

CUSTOMERS BILLING ADDRESS

-OR-

PECO ENERGY ACCOUNT#

240

AMPS _________

120/240

PHASE

VOLTS

WIRES

120/208

CITY, STATE

ZIP CODE

TELE. #

120

277/480

120/240

13200

3 or 4

SEND REPLY TO:

120/240

33000

3 or 4

ELECTRICIAN’S OR BUILDER’S NAME

METER INFO:

 Two Meters, Commercial (General/Totalizer)

 Single Meter Required

 Multiple Meter Total No. _____________

ADDRESS

Reply Requested by:

HEATING/AIR CONDITIONING:

 Central Air _____ Tons

 Resistance

 Heat Pump _____ Tons

 Natural Gas

 Propane



Type Back-Up _________

Other ________________

City, State

ZIP CODE

CHARACTERISTICS OF NEW OR ADDITIONAL LOAD:

CONNECTED

PECO ENERGY USE ONLY (DEMAND)

TYPE

LOAD (kW)

TELE. #

E-MAIL ADDRESS

SUMMER (kW)

Winter (kW)

LIGHTING

CURRENT CONSUTRCTION STATUS:

HEATING

 Not Started – Date Customer Will Start Work: _____/_____/_____

 In Progress  Completed

AIR/COND.

Approximate Date Service Requested: _____/_____/_____

TANKLESS WATER HTR

MISC

CUSTOMER COMMENTS/ DESCRIPTIN OF WORK

TOTAL

Include single line diagram and substation arrangement if appropriate.

LARGEST MOTOR SPECIFICATIONS

QUANTITY

TOTALIZER LOAD

SIZE (HP)

LOCKED ROTOR CURRENT

MOTOR CODE LETTER

SUBMITTED BY: _________________________________ DATE: ______________________

PHASE

GENERAL LOAD

VOLTAGE

PECO

Application for Electric Service & Meter

M-24175 (front) Rev. 5/18

Enclosures:  Site Plans  Single Line Diagram  Substation Arrangement

FREQ. OF STARTING (PER HR.)

PURPOSE

INFORMATION BELOW WILL BE FILLED IN BY PECO:

Service Request No.

BUS/MAJ ACCT REP

TELEPHONE

DATA RECEIVED

DESIGNER

DATA RECEIVED

TELEPHONE

POL SUB

RATE

RIDER

CONTRACT LIMITS

SIC NUMBER

DATE REPLY

NUMBER

COMPLETED

AMPS

WIRES

VOLTAGE

PHASE

CIRCUIT

C-QUAD

T-QUAD

LOAD (KVA)

SUMMER_____WINTER ____

SERVICE CHARACTERISITICS – Select One from Each

POLE # / MH # LOCATION

CUT THROUGH DATE

SERVICE TYPE

 Aerial

 Underground

 URD

RATE:

 Residential

 Comm (Non-

 Comm (Demand)

 HT/PD

Demand)

GENERATION PROCUREMENT CLASS:

 Class 1 (Residential)

 Class 2 (Commercial, less than 100kW)

 Class 3 (Commercial, 100kW to 500kW)

 Class 4 (Commercial, greater than 500kW)

NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load

estimates for the first year of service. The customer’s Procurement Class will be adjusted each year,

based on actual usage.

METER TYPE:

 KWH

 IND. DEMAND

 RECORDER

 TOU

SERVICE PHASING:

 SINGLE PHASE

 TWO PHASE

 THREE PHASE

SERVICE REQUIREMENTS:

METERING LOCATION AND REQUIREMENTS:

 Present Location:

Meter # _______________

 CTs-

 PTs-________

 Present Service OK

 Loop Only

________

 Taps Only

 See Job # ________________________________

 Indoo

 Outdoor

 On ________ Wall, ________ Ft. From ________ Wall, ________ ft. Above

Ground

ADVANCE NOTIFICATIONS:

CUSTOMER BILLING:

Underwriter’s Cert.

 Yes

 No

Advance Billing

 Yes

$_______________

Required

Customer to Trench

 Yes

 No

 No Customer

Permit Required

 Yes

 No

 State

 Other

Charges:

$_______________

_______________________

Cust. #

Date

ACT 222 Cert. Required

 Yes #

 No

 N/A

_________________________

___________________________

_____________

BTCO #

Date

PA One Call #

Date

________________________

___________________________

__________________________

CATV #

Date

 Gas

 BTCO

 CATV

 Other

Date

________________________

___________________________

___________________

__________________________

Other

Date

__________________________

___________________________

SKETCH / INSTRUCTIONS

PECO

Application for Electric Service & Meter

M-24175 (front) Rev. 5/18

INSTRUCTIONS:

Please complete the front page of this request and return to the PECO Regional Office (listed below) in the area service is required. Incomplete information may result in a delay in processing.

NOTE: IF DEMOLISHING A BUILDING AND NEED PECO TO REMOVE ELECTRIC OR GAS FACILITIES, PLEASE CALL 8-1-1 (PA ONE CALL) FOR DEMOLITION REQUEST

NEW BUSINESS SERVICES (1-800-454-4100) http://www.peco.com

PHILADELPHIA COUNTY

DELAWARE & CHESTER COUNTIES

BUCKS & MONTGOMERY

NEW RESIDENTIAL

830 S. Schuylkill Ave.

1050 W. Swedesford Rd.

COUNTIES

CONSTRUCTION

Philadelphia, PA 19146

Berwyn, PA 19312

400 Park Ave.

(All Counties)

Email:PhilaNewBusiness@ex

Email:DelChesterServiceApplications@exe

Warminster, PA 18974

400 Park Ave.

eloncorp.com

loncorp.com

Email:Bucksmontserviceapplications@e

Warminster, PA 18974

Fax # (215) 731-2327

Fax # (610) 725-1416

xeloncorp.com

Email:NRCGMETERORDERS@P

Fax # (215) 956-3240

eco-Energy.com

Fax # (215) 956-3380

CUSTOMER NAME

Tax ID # or SSN

TYPE OF REQUEST

New Service

Load Increase/Decrease

Reintroduction of Service

Temporary Service

Upgrade/Changes

Demolition (Remove

** ADDRESS TO BE SERVED

APARTMENT/LOT #

Separation of Wiring

Service Relocation

Service)

Make-Safe (De-

energize/Cover)

CITY, STATE

ZIP CODE

TYPE OF SERVICE: Please include site plan.

 RESIDENTIAL

 COMMERICAL

 Single House

 Mobile Home

 Store

 Office

UTILITY POLE#

SUBDIVISION/DEVELOPMENT

TOWNSHIP/MUNICIPALITY/WARD#

 Apartment

 Modular Home

 Industrial

 Warehouse

 Duplex

 Town House

 Restaurant

 Other _____________________________

Area of Building _______________________ Sq. Ft.

If Applicable

SERVICE CHARACTERISTICS:

Please use this address when applying for underwriter’s inspection

PHASE

VOLTS

WIRES

 Underground

 Aerial

CUSTOMERS BILLING ADDRESS

PECO ENERGY ACCOUNT#

240

-OR-

AMPS _________

120/240

PHASE

VOLTS

WIRES

120/208

CITY, STATE

ZIP CODE

TELE. #

120

277/480

120/240

13200

3 or 4

SEND REPLY TO:

120/240

33000

3 or 4

ELECTRICIAN’S OR BUILDER’S NAME

METER INFO:

 Two Meters, Commercial (General/Totalizer)

 Single Meter Required

 Multiple Meter Total No. _____________

ADDRESS

Reply Requested by:

HEATING/AIR CONDITIONING:

 Central Air _____ Tons

 Resistance

 Heat Pump _____ Tons

 Natural Gas

 Propane



Type Back-Up _________

Other ________________

CITY, STATE

ZIP CODE

CHARACTERISTICS OF NEW OR ADDITIONAL LOAD:

CONNECTED

PECO ENERGY USE ONLY (DEMAND)

TELE. #

E-MAIL ADDRESS #

TYPE

LOAD (kW)

SUMMER (kW)

Winter (kW)

LIGHTING

CURRENT CONSUTRCTION STATUS:

HEATING

 Not Started – Date Customer Will Start Work: _____/_____/_____  In Progress  Completed

AIR/COND.

Approximate Date Service Requested: _____/_____/_____

TANKLESS WATER HTR

MISC

CUSTOMER COMMENTS/ DESCIPTION OF WORK:

TOTAL

Include single line diagram and substation arrangement if appropriate.

LARGEST MOTOR SPECIFICATIONS

QUANTITY

TOTALIZER LOAD

SIZE (HP)

LOCKED ROTOR CURRENT

MOTOR CODE LETTER

SUBMITTED BY: _________________________________ DATE: ______________________

PHASE

GENERAL LOAD

VOLTAGE

PECO

Application for Electric Service & Meter

M-24175 (front) Rev. 5/18

Enclosures:  Site Plans  Single Line Diagram  Substation Arrangement

FREQ. OF STARTING (PER HR.)

PURPOSE

INFORMATION BELOW WILL BE FILLED IN BY PECO:

Service Request No.

BUS/MAJ ACCT REP

TELEPHONE

DATA RECEIVED

DESIGNER

DATA RECEIVED

TELEPHONE

POL SUB

RATE

RIDER

CONTRACT LIMITS

SIC NUMBER

T NUMBER

DATE REPLY

COMPLETED

AMPS

WIRES

VOLTAGE

PHASE

CIRCUIT

C-QUAD

T-QUAD

LOAD (KVA)

SUMMER_____WINTER

____

SERVICE CHARACTERISITICS – Select One from Each

POLE # / MH # LOCATION

CUT THROUGH DATE

SERVICE TYPE

 Aerial

 Underground

 URD

RATE:

 Residential

 Comm (Non-Demand)

 Comm (Demand)

 HT/PD

GENERATION PROCUREMENT CLASS:

 Class 1 (Residential)

 Class 2 (Commercial, less than 100kW)

 Class 3 (Commercial, 100kW to 500kW)

 Class 4 (Commercial, greater than 500kW)

NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load estimates for

the first year of service. The customer’s Procurement Class will be adjusted each year, based on actual usage.

METER TYPE:

 KWH

 IND. DEMAND

 RECORDER

 TOU

SERVICE PHASING:

 SINGLE PHASE

 TWO PHASE

 THREE PHASE

SERVICE REQUIREMENTS:

METERING LOCATION AND REQUIREMENTS:

 Present Location:

Meter # _______________

 CTs- ________

 PTs-________

 Present Service OK

 Loop Only

 Indoor  Outdoor

 On ________

Wall, ________ Ft. From ________ Wall, ________ ft. Above Ground

 Taps Only

 See Job # _________________________________

ADVANCE NOTIFICATIONS:

CUSTOMER BILLING:

Underwriter’s Cert. Required

 Yes

 No

Advance Billing Required  Yes

$_________________

Customer to Trench

 Yes

 No

 No Customer Charges: $_________________

Permit Required

 Yes

 No

 State

 Other _______________________

Cust. # _________________________

Date ___________________________

ACT 222 Cert. Required

 Yes # _____________

 No

 N/A

BTCO # ________________________

Date ___________________________

PA One Call # ___________________________

Date __________________________

CATV # ________________________

Date ___________________________

 Gas

 BTCO

 CATV

 Other ___________________

Date __________________________

Other __________________________

Date ___________________________

SKETCH / INSTRUCTIONS

Document Information

Fact Name	Fact Description
Application Purpose	The Peco Service and Meter Application form is used to request electric service and meter installation from PECO.
Required Information	Applicants must provide personal identification, including a driver's license number or Social Security number.
Construction Status	The form requires applicants to indicate their current construction status, such as whether the work has started or is completed.
Service Types	Options for service types include residential, commercial, and industrial, among others.
Load Characteristics	Applicants must complete a table detailing load characteristics, including connected KW and maximum demand for both summer and winter.
Inspection Requirement	All work must comply with the PECO Electric Service Requirements manual and be inspected by an approved agency.
Application Processing	Incomplete applications may lead to delays in processing, so thoroughness is essential.
Communication Deadline	PECO reserves the right to cancel requests if no communication is received within 90 days of their response.
Demolition Notice	For building demolitions requiring service removal, applicants must contact 8-1-1 (PA One Call).
Regional Offices	Applications must be sent to the appropriate PECO regional office based on the service location.

Peco Service And Meter Application - Usage Guidelines

Filling out the PECO Service and Meter Application form requires attention to detail. Completing the form accurately ensures that your request is processed without unnecessary delays. Follow these steps to fill out the application correctly.

Read the instructions at the top of the application.
Locate the PECO regional office where the service is requested. Check the appropriate box and prepare to mail or fax the completed application to that office.
Fill in your name and the service location. Provide your Driver's License Number or Social Security Number. If applicable, include the PECO Energy pole number and/or Lot number.
Complete the billing address or PECO account number from the last 60 days.
Provide details about yourself as the electrician or contractor. Include your Tax Identification number and specify where you want the reply sent. Indicate the desired date for the reply.
State your current construction status and the date when PECO service is requested. Avoid phrases like "as soon as possible."
Indicate the type of request and type of service. Include the number of units and area per unit.
Provide service characteristics and meter information.
Complete the load characteristics table, detailing connected KW, maximum summer KW demand, and maximum winter KW demand for each applicable load type.
Fill in the motor information table.
If using compensated metering, indicate the totalizer and general load in KW.
Add any additional comments you feel are necessary.
Sign and date the application to complete the process.

Common PDF Forms

Advance Salary Application Form - Ensure that your request aligns with the company’s financial procedures.

For those looking to understand the advantages of a temporary Power of Attorney for a Child, this form provides an effective way to ensure your child's well-being while you are away. This document empowers designated individuals to handle important decisions that affect your child's daily life.

Wage and Tax Statement - Employers must handle W-2s with care to avoid identity theft risks.

Dos and Don'ts

When filling out the PECO Service and Meter Application form, there are several important dos and don'ts to keep in mind. Here’s a helpful guide:

Do read the instructions carefully before starting the application.
Do include your Driver's License Number or Social Security Number as required.
Do ensure all fields are completed accurately to avoid delays in processing.
Do sign and date the application before submission.

Don't leave any fields blank; incomplete applications can lead to processing delays.
Don't use vague terms like "as soon as possible" for your service request date.
Don't forget to provide your electrician or contractor's Tax Identification number.
Don't submit the application without verifying the service availability in your area.

Common mistakes

Incomplete Personal Information: Many applicants fail to provide complete information regarding the customer's name, service location, and required identification numbers. This includes the Driver's License Number or Social Security Number, which is now mandatory.
Incorrect Service Type Selection: Applicants often select the wrong type of service or request type. It is crucial to choose the correct category, such as "New Service" or "Load Increase," to avoid processing delays.
Failure to Specify Construction Status: Not indicating the current construction status can lead to confusion. Applicants should clearly state whether the work is "Not Started," "In Progress," or "Completed," along with the anticipated service request date.
Missing Signature and Date: A common oversight is neglecting to sign and date the application. The application must be signed to be considered valid, and missing this step can result in outright rejection.

Get Peco Service And Meter Application PDF